QX80 (DSM) Reciever Connection

Help
,
1

Thanks for the prompt delivery of my QX80 (DSM) kit, I’ve got it all assembled and bound to my DX7, however i can’t get the Cleanflight configurator to recognise any stick inputs.

Can you please confirm the wiring for the RX on this.

I’ve got the Rx + connected to Pin 2, Rx - to Pin 1 and Rx pin 1 to pin 3 of UART2, which i believe is the way the diagram says to connect it.

Please advise if this connection is correct, and also what CF settings to use to connect the Rx to the FC

2

The instructions aren’t overly clear, but I found the receiver online and that helped.

I’ve now got The Rx + connected to Pin 2, Rx - to Pin 1 and Rx pin 1 to Rx- and Rx pin 2 to pin 3 of UART2.