Hey all, Can you guys tell me how to connect Matek f722 to betaflight? I pressed and held the button and connected and when I try to flash the firmware, it says No response from the bootloader, programming: FAILED Can someone help me with what to do with betaflight? [image]

Have a look here [image] Fix any STM32 DFU Drivers issues when flashing Betaflight/Cleanflight firmware Guides Many months ago if you ever had any issues with connecting your flight controller to cleanflight/betaflight or any other variation the defacto suggest…

Still doesn’t work, I tried ImpulseRC and also zadig. They both don’t pick up the fc. I tried going in to the device manager and it doesn’tshow anything. Please help. Then I connect the fc it has a red light and blinking blue light. When I press hold the button and plug in, it shows twored lights. …

Ok check if you trying flash fc with correct fc target. Restart computer and connect usb cable into different usb socket. If you are using usb hub connect usb cable directly to computer.

When I try to flash, is says this in the logs Serial port successfully opened with ID: 3 No configuration received within 10 seconds, communication failed Serial port successfully closed Other ports says : Failed to open serial port. I tried all ports I restarted, tried different computers, di…

I think its faulty fc. My computer sometimes dont recognize fc but after restar pc its always start working. Check if the usb connector its not become loose on fc ( i rip off twice mine ). Touch solder connection on fc usb socket with solderig iron. Thant will be mine last to do step before give up…

pffff… No luck :frowning: Thanks for the help though :slight_smile:

Try flash it without pressing button. Just connect it and pres flash. Can you connect to actual betaflight and change any settings ?

No I can’t connect it/flash. Don’t work either with button pressed or without :frowning:

@UnmannedTech , I was an idiot not seeing if it works before I solder some pins into the board. Am I too late to return it?

Usually we still offer returns/replacements assuming your soldering isn’t what caused the fault. So it usually depends, but if you have been using it correctly and it just died then we should be able to replace it for you. Please just send an email to support with a few photos and a summary of the …

Matek F722 + Betaflight

Help

Krewett October 20, 2018, 4:56pm 2

Have a look here

Topic		Replies	Views
Fix any STM32 DFU Drivers issues when flashing Betaflight/Cleanflight firmware Guides flightcontroller , cleanflight , betaflight	13	219283	April 13, 2019
Need help problem solving my drone issue Help	12	9439	February 6, 2020
Matek f405 / Betaflight - No Accelerometer Help	17	8124	July 27, 2017
Failed to open serial port Help	5	10741	October 27, 2018
Problem connecting to pc Help betaflight , windows	12	5709	May 22, 2019

Matek F722 + Betaflight

Related topics