Help connecting PDB (Matek XT60) to flight controller (F4 V3.1S Plus FC)

Help
,
1

Hi everyone,

I’m very new to building drones and I’ve run into a wiring issue and I would appreciate any guidance you can offer

Photos :

  1. Overall image ( Motors connected to ESCS connected to the PDB with two wires from 5V and GND pads of the PDB ) :

Overall image
Overall image1920×2560 287 KB

  1. Close up image of the PDB with ESCs connected :

Closed up image of PDB with ESCs connected
Closed up image of PDB with ESCs connected1920×2560 330 KB

  1. Top of the Flight controller :

Top of the flight controller
Top of the flight controller1920×1861 281 KB

  1. Bottom of the flight controller :

Bottom of the flight controller
Bottom of the flight controller1721×1771 378 KB

What I have done so far :

  • I’ve already connected my ESCs ( BHeli_S Littlebee 30A) to my PDB (Matek XT60)
    Now I just need to connect the PDB (Matek XT60) onto my flight controller (F4 V3S plus FC ) , but I am having trouble finding any wiring diagrams for my flight controller
    So I would really appreciate any advice, diagrams you can offer for my flight controller

If you need any other photos of my components or my drone, feel free to ask :slight_smile:
Thank you so much for your time.