27 June 2019 09:07
Hi Guys, I am a complete newbie and really need some advice.
Can anyone tell me if the FS-A8S Receiver is compatible with the crius distribution board v1.0?
If so could you please explain to me in detail how this is done.
Thanks in advance for your help.
27 June 2019 15:22
The Crius Distribution Board does not seem to have a voltage regulator so it is not compatible with any Receiver except you do all the wiring over the FC or an external bec which is normally done.
I suggest doing that.
What type of Fligth Controller are your using?
27 June 2019 15:43
Hi Luca, thanks for the reply.
I have a Mini CC3D flight controller.
27 June 2019 21:18
This Guide provides all the necessary information:
The CC3D is a powerful and affordable flight controller that is very popular to use mainly on miniquad copters due to its small form factor. It has many advanced features that you can use if you add a GPS module, even waypoint based flight,. However, most users don’t bother with this for mini quadcopters and just want the basic setup. This post will provide some links and comments to some of the better CC3D setup guides that we have found on the internet. If you have made one, or know of a gr…
If you have further Questions regarding the wiring of the Receiver feel free to ask.
28 June 2019 06:44
Thank you very much Luca this is very helpful.