If you have a situation where your Jumper T16 is not booting up properly, or is stuck on the splash screen where none of the buttons are working, this quite post will help you get it sorted.
This issus usually occus after a firmware update, and in some situations can occur after chaging settings via OpenTX companion.
After talking with Jumper they have reccomended the following to avoid this issue in the future:
- Do not use openTX companion to change settings on the T16 as sometimes it can cause this issue.
- Only use official jumper firmware and SD card contents. This can be downloaded here https://www.jumper.xyz/portal.php?mod=view&aid=17