I am currently facing electronics issues with a quadcopter I just made. Despite all performed researches, I am still not able to find a solution.
Here is my setup:
Frame: Homemade (260) H frame made of wood and aluminium.
Flight Controller: Open Pilot cc3d nano
Motors: DYS BE1806-2300kv Brushless Multirotor Motor 3S~4S
ESC: KINGKONG 12A OPTO ESC BLHeli (2-4S)
Props: Gemfan 5030 (ABS)
Battery: Zippy 4S 1300mAh 40C
Sometimes, during a classic flight, the quad seems to become crazy without any reasons. It flips around all axis and end this hell spinning on the ground
At first, I made a complete reset of the CC3D in order to know if the FC could be involved but the problem is still here.
After that I moved the ESCs from the inside of the frame to the outside because I suspected an over temperature on the ESCs. The problem is still here.
If you have any ideas which can help me to solve this issue, that will be great
Thank you in advance for your help, sorry if I have made some grammar mistake, english is not my native language.